We devoted ourself to regulating standards. Glove from Glovex has been certified as per the PPE 89/686/EEC Directive and relevant EN standards, and is CE marked.
📘 This pictogram indicates that the user has to consult the instructions for use.
| PERFORMANCE LEVELS | 1 | 2 | 3 | 4 |
|---|---|---|---|---|
| A. Burning behaviour (after flame & after glow time) | <20 s | <10 s <120 s |
<3 s <25 s |
<2 s <5 s |
| B. Contact heat (Temp. & threshold time) | 100°C >15 s |
200°C >15 s |
350°C >15 s |
500°C >15 s |
| C. Convective heat (heat transfer delay) | >4 s | >7 s | >10 s | >18 s |
| D. Radiant heat (heat transfer delay) | >7 s | >20 s | >50 s | >95 s |
| E. Small drops molten metal (#drops) | >10 | >15 | >25 | >35 |
| F. Large quantity molten metal (mass) | 30 g | 60 g | 120 g | 200 g |
| PERFORMANCE LEVELS | 1 | 2 | 3 | 4 | 5 |
|---|---|---|---|---|---|
| A. Convective cold. Thermal insulation ITR (m²·C/W) | <0.10 | 0.10 <1 <0.15 |
0.15<1 <0.22 |
0.22<1 <0.30 |
0.30<1 |
| B. Contact cold. Thermal resistance R (m²·C/W) | R<0.025 | 0.025<R<0.050 | 0.050<R<0.100 | 0.100<R<0.150 | 0.150<R |
| C. Water penetration test | Fail | Pass | - | - | - |
| PERFORMANCE LEVELS | 1 | 2 | 3 | 4 | 5 |
|---|---|---|---|---|---|
| A. Abrasion resistance (cycles) | 100 | 500 | 2000 | 8000 | - |
| B. Cut resistance (index) | 1.2 | 2.5 | 5.0 | 10.1 | 20.0 |
| C. Tear resistance (Newton) | 10 | 25 | 50 | 75 | - |
| D. Puncture resistance (Newton) | 20 | 60 | 100 | 150 | - |
| TEST VALUE | CUT RISKS: SUGGESTED AREAS OF USE |
|---|---|
| A 2–4.9 Newton 203–508 g |
Light cut risks: General purpose, assembly, maintenance, warehouse, shipping. |
| B 5–9.9 Newton 509–1019 g |
Light to medium risks: Assembly, automotive, construction. |
| C 10–14.9 Newton 1020–1529 g |
Medium cut risks: Oil & gas, metal handling, light glass handling, automotive, manufacturing, construction, assembly. |
| D 15–21.9 Newton 1530–2242 g |
Medium to high cut risks: Manufacturing, construction, glass handling, oil & gas. |
| E 22–29.9 Newton 2243–3058 g |
High cut risks: Metal fabrication, construction, machining, paper production, glass manufacturing. |
| F 30+ Newton 3059+ g |
High cut risks: Metal stamping, recycling plants, paper production, glass manufacturing, aerospace industry. |
At least Level 1 performance (more than 10 minutes) against at least one chemical on the list.
At least Level 2 performance (more than 30 minutes) against at least three chemicals on the list.
At least Level 2 performance (more than 30 minutes) against at least six chemicals on the list.
| Performance Level | 0 | 1 | 2 | 3 | 4 | 5 | 6 |
|---|---|---|---|---|---|---|---|
| Minutes | <10 | 10 | 30 | 60 | 120 | 240 | >480 |
Gloves protecting from direct contact with radioactive substances
Gloves protecting from direct contact with radiations (X-ray, Alpha-, Beta-, Gamma- or Neutron radiation)
